CISCO CATALYST 9120AX SERIES ACCESS SERIES

SKU: C9120AXI-Z

$ 3,560 $ 1,663

Out of Stock
Best price guaranteed
Free simple returns
Free shipping on orders over $100
Manufacturer warranty included

CISCO CATALYST 9120AX SERIES ACCESS SERIES

C9120AXI-Z

Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9120AXI-Z is the Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4×4:4 MIMO, Z Domain.

Cisco AP 9120 series provides these features:

– 802.11ax (Wi-Fi 6)

– Cisco RF ASIC

– Uplink/downlink OFDMA

– MU_MIMO technology

– Target wake time

– BSS coloring

– Intelligent Capture

– Flexible Radio Assignment

– Dual 5-GHz radio support

– Smart antenna connector

– Cisco Mobility Express

– Multigigabit Ethernet support

– Bluetooth 5.0

– Container support for applications

– Apple Features

Description

Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4×4:4 MIMO, Z Domain

Software

_  Cisco Unified Wireless Network Software Release 8.9.x or later

_  Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later

Supported wireless LAN controllers

_  Cisco Catalyst 9800 Series Wireless Controllers

_  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

_  4×4 MIMO with four spatial streams

_  Maximal Ratio Combining (MRC)

_  802.11n and 802.11a/g beamforming

_  20- and 40-MHz channels

_  PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

_  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

_  802.11 Dynamic Frequency Selection (DFS)

_  Cyclic Shift Diversity (CSD) support

802.11ac

_  4×4 downlink MU-MIMO with four spatial streams

_  MRC

_  802.11ac beamforming

_  20-, 40-, 80-, and 160-MHz channels

_  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

_  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

_  802.11 DFS

_  CSD support

802.11ax

_  4×4 downlink MU-MIMO with four spatial streams

_  Uplink/downlink OFDMA

_  TWT

_  BSS coloring

_  MRC

_  802.11ax beamforming

_  20-, 40-, 80-, and 160-MHz channels

_  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

_  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

_  802.11 DFS

_  CSD support

Integrated antenna

Flexible radio (either on 2.4GHz or on 5GHz)

_  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

_  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Dedicated 5GHz radio

_  5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately)

_  Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

_  Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna

_  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

_  Supports Self-Identifiable Antennas (SIA) on one RP-TNC port

Smart Antenna Connector

_  Available on the 9120E and on the 9120P only

_  Compact multi RF connector with DART interface

_  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector

_  Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio

Interfaces

_  1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

_  Management console port (RJ-45)

_  USB 2.0 @ 3.75W (enabled via future software)

Indicators

_  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

_  Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7” (21.6 x 21.6 x 4.3 cm)

Input power requirements

_  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)

_  Cisco power injector, AIR-PWRINJ6=

_  802.3af PoE

_  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Environmental

Cisco Catalyst 9120AXI

_  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

_  Nonoperating (storage) altitude test: 25?C, 15,000 ft.

_  Operating temperature: 32° to 122°F (0° to 50°C)

_  Operating humidity: 10% to 90% (noncondensing)

_  Operating altitude test: 40?C, 9843 ft.

System memory

_  2048 MB DRAM

_  1024 MB flash

Available transmit power settings

2.4 GHz

_  23 dBm (200 mW)

_  20 dBm (100 mW)

_  17 dBm (50 mW)

_  14 dBm (25 mW)

_  11 dBm (12.5 mW)

_  8 dBm (6.25 mW)

_  5 dBm (3.13 mW)

_  2 dBm (1.56 mW)

_  -1dBm (0.79mW)

_  -4dBm(0.39mW)

5 GHz

_  26 dBm (400 mW)

_  23 dBm (200 mW)

_  20 dBm (100 mW)

_  17 dBm (50 mW)

_  14 dBm (25 mW)

_  11 dBm (12.5 mW)

_  8 dBm (6.25 mW)

_  5 dBm (3.13 mW)

_  2 dBm (1.56 mW)

_  -1dBm (0.79mW)

Frequency band and 20-MHz operating channels

Z (Z regulatory domain):

_ 2.412 to 2.462 GHz; 11 channels
_ 5.180 to 5.320 GHz; 8 channels
_ 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
_ 5.745 to 5.825 GHz; 5 channels

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.

Shipping

We can ship to virtually any address in Australia. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.