Cisco Aironet 1570 Series Outdoor Access Point Hardware
Cisco Aironet 1570 Series Outdoor Access Point Hardware
802.11 __ support with 4×4 MIMO, three spatial streams
It delivers higher data rates over a greater area with pervasive coverage than any competing AP. It provides a data rate of up to 1.3 Gbps, roughly triple the rates offered by today’s high-end 802.11 n access points.
Maximum RF radiated power allowable on both 2.4 and 5 GHz radios
This feature lets you use the fewest number of APs to get the greatest possible area coverage and highest throughput rates.
Cisco High-Density Experience (HDX)
It helps maintain network performance as Wi-Fi clients, APs, and high-bandwidth applications join and roam the network.
Cisco CleanAir technology
It provides spectrum intelligence across 20-, 40-, and 80-MHz channels to combat performance problems caused by wireless interference. Also part of Cisco HDX technology.
Cisco ClientLink 3.0
It uses true beamforming smart-antenna technology to improve downlink performance by up to 6 dB to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. It increases smartphone and tablet battery efficiency by up to 50 percent.
It boosts performance and reliability by reducing the impact of signal fade and associated “dead zones”.
Cisco Flexible Antenna Port technology
It makes the AP’s external antenna ports software-configurable for either four dual-band (2.4 and 5 GHz) configuration or two pairs of single-band configuration with one pair operating at 2.4 GHz and the other at 5 GHz. This provides the operator with added flexibility in coverage options.
Modular architecture design
The architecture of the 1572E models provides the flexibility for a potential add-on module for future proofing and investment protection. For example, you could add external modules with technology options such as a 4G LTE picocell or a sensor. Such a module could be field-upgradeable to an existing 1570 network.
Central management using Cisco Prime infrastructure
This is a network lifecycle management tool that integrates with Cisco Aironet APs and WLAN controllers to configure and manage your wireless networks. It helps prevent costly maintenance service calls to outdoor locations. Network administrators have a single solution for RF prediction, policy provisioning, network optimization, troubleshooting, security monitoring, and WLAN system management.
Device Type Wireless access point
Ruggedized Design Outdoor
Built-in Devices GPS
Width 7.9 in
Depth 6.3 in
Height 11.8 in
Weight 13.45 lbs
Localization Australia, New Zealand, Brazil
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 1.3 Gbps
Line Coding Format CCK
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Spread Spectrum Method DSSS
Network / Transport Protocol L2TP, IPSec
Frequency Band 2.4 GHz, 5 GHz
Status Indicators Status, uplink
Features Auto-sensing per device, MAC address filtering, DFS support, VPN passthrough, CleanAir technology, reset button, pole mountable, Maximum Ratio Combining (MRC), 4T4R MIMO technology, GPS sync compatible, ClientLink 3.0 technology, cyclic shift diversity (CSD), Cisco Flexible Antenna Port technology, beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU
Encryption Algorithm LEAP, AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2
Authentication Method X.509 certificates, Extensible Authentication Protocol (EAP)
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac
Expansion / Connectivity
Interfaces 4 x antenna – N connector | 1 x – SFP (mini-GBIC) | 1 x console – RJ-45 | 1 x antenna
Compliant Standards ANSI C62.41, ICES-003, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, NEMA Type 4X, UL 60950-1 Second Edition, FCC Part 15.107, FCC Part 15.109, AS/NZS 4268, FCC Part 15.407, ARIB STD-T66, ARIB STD-T71, IP67, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, EN 300 328, EN 301 489-1, EN 301 893, EN 301 489-17
Power Over Ethernet (PoE) Supported UPOE
Voltage Required AC 120/230 V / DC 10 – 16 V (50/60 Hz)
Service & Support Limited warranty – 1 year
Min Operating Temperature -40 °F
Max Operating Temperature 149 °F
Country of Origin
Country of Origin CN
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
We can ship to virtually any address in Australia. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.